Publicaciones del consorcio CENAPROT (JCR)

Sitio Web

2022

Unraveling the Ca–P species produced over the time during phosphorus removal from aqueous solution using biocomposite of eggshell-palm mesocarp fiber

Pérez, S.,, Muñoz-Saldaña, J., Garcia-Nunez, J.A., Acelas, N.,  Flórez, E., Chemosphere (2022). https://doi.org/10.1016/j.chemosphere.2021.132333

2021

Manufacturing of Photoactive β-Bismuth Oxide by Flame Spray Oxidation

Ayala-Ayala, M.T., Ferrer-Pacheco, M.Y. & Muñoz-Saldaña, J. J Therm Spray Tech (2021). https://doi.org/10.1007/s11666-021-01182-2;

Phosphate removal from aqueous solutions by heat treatment of eggshell and palm fiber

Sebastián Pérez, Juan Muñoz Saldaña, Nancy Acelas, Elizábeth Flórez. Journal of Environmental Chemical Engineering (2021), 104684;

Study of volumetric energy density limitations on the IN718 mesostructure and microstructure in laser powder bed fusion process

G.V. de Leon Nope, L.I. Perez-Andrade, J. Corona-Castuera, D.G. Espinosa-Arbelaez, J. Muñoz-Saldaña, J.M. Alvarado-Orozco. Journal of Manufacturing Processes (2021) 64, 1261-1272;

2020

Effect of grit-blasting on the competitive growth between θ-Al2O3 and α-Al2O3 during the oxidation of β-(Ni,Pt)Al bond coat systems

JE Garcia-Herrera, DG Espinosa-Arbelaez, LA Cáceres-Díaz, J Muñoz-Saldaña, JM Alvarado-Orozco. Materials Letters (2020) 277, 128288;

In-vitro bioactivity and cytotoxicity of polarized (Bi0.5Na0.5)TiO3 ceramics as a novel biomaterial for bone repair

Jennifer Andrea Hermann-Muñoz, July Andrea Rincón-Lópeza, David Fernández-Benavides, R. Detsch, J.M. Alvarado-Orozcoc, A.R. Boccaccin, Juan Muñoz-Saldaña. Materials Letters (2020) 128078;

High ionic conductivity dysprosium and tantalum Co-doped bismuth oxide electrolyte for low-temperature SOFCs

P.S Cardenas-Terrazas, M. T. Ayala-Ayala, J. Muñoz-Saldaña, A. F. Fuentes, D. A. Leal-Chavez, J. E. Ledezma-Sillas, C. Carreño-Gallardo, J. M. Herrera-Ramirez. Ionics (2020)  1-8;

Apatite Mineralization Process from Silicocarnotite Bioceramics: Mechanism of Crystal Growth and Maturation

July Andrea Rincón-López, Jennifer Andrea Hermann-Muñoz, Núria Cinca-Luis, Lluís López-Conesa, David Andrés Fernández-Benavides, Irene García-Cano, Jose Maria Guilemany-Casadamon, Aldo R Boccaccini, Juan Muñoz-Saldaña, Juan Manuel Alvarado-Orozco. Crystal Growth & Design (2020) 20, 4030-4045;

Swirling Effects in Atmospheric Plasma Spraying Process: Experiments and Simulation

Israel Martínez-Villegas, Alma G Mora-García, Haideé Ruiz-Luna, John McKelliget, Carlos A Poblano-Salas, Juan Muñoz-Saldaña, Gerardo Trápaga-Martínez. Coatings (2020) 10(4), 388;

Microstructural analysis after furnace cyclic testing of pre-oxidized ReneN5/(Ni,Pt)Al/7YSZ thermal barrier coatings

A G Mora-García, H Ruiz-Luna, JM Alvarado-Orozco, G Mondragón-Rodríguez, U Schulz, J Muñoz-Saldaña. Surface and Coatings Technology (2020) 403, 1-10;

Synthesis and characterization of 50-50 wt. lanthanum aluminate-lanthanum zirconate composite dried by spray-drying

J. Hernández Muñoz, W., Zárate Medina, J., Serrato Rodríguez, J., Muñoz Saldaña. MRS Advances (2020) 1, 1-7;

Creep behavior of polycrystalline and single crystal Ni-based superalloys coated with Ta-containing NiCoCrAlY by high-velocity oxy-fuel spraying

Alma-Gabriela Mora-García, Mike Mosbacher, Julia Hastreiter, Rainer Völkl, Uwe Glatzel, J Muñoz-Saldaña. Scripta Materialia (2020) 178, 522-526;

Effect of ZnO content on the physical, mechanical and chemical properties of glass-ceramics in the CaO-SiO2-Al2O3 system

Estefanía Montoya-Quesada, Mónica A Villaquirán-Caicedo, Ruby Mejía de Gutiérrez, J Muñoz-Saldaña. Ceramics International (2020) 46(4), 4322-4328;

Bovine-derived hydroxyapatite coatings deposited by high-velocity oxygen-fuel and atmospheric plasma spray processes: A comparative study

GA Clavijo-Mejía, JA Hermann-Muñoz, JA Rincón-López, H Ageorges, J Muñoz-Saldaña. Surface and Coatings Technology (2020) 381, 125193;

Phosphate removal from aqueous solutions by heat treatment of eggshell and palm fiber

John Henao, Oscar Sotelo-Mazon, Astrid L. Giraldo-Betancur, Juanita Hincapie-Bedoya, Diego G. Espinosa-Arbelaez, Carlos Poblano-Salas, Cecilia Cuevas-Arteaga, Jorge Corona-Castuera, Lorenzo Martinez-Gomez. Journal of Materials Research and Technology (2020) 9(6), 14002-14016;

Corrosion of Biomaterials: Electrochemical Techniques, in Vitro Test, and Methods to Mitigate Corrosion

Principles and Applications of Thermal Spray Coatings

Oscar Sotelo-Mazón John Henao, Carlos Poblano-Salas, Fabio Vargas, Astrid Giraldo-Betancur, Jorge Corona-Castuera. Advanced Surface Coating Techniques for Modern Industrial Applications IGI Global (2020) 3, 31-70;

Surface modification and tribological behavior of plasma nitrided Inconel 718 manufactured via direct melting laser sintering method

Mondragón-Rodríguez, G.C., N Torres-Padilla, N Camacho, DG Espinosa-Arbeláez, GV de León-Nope, JM González-Carmona, JM Alvarado-Orozco. Surface and Coatings Technology (2020) 387, 125526;

Hot corrosion mechanism of yttria-stabilized zirconia powder in the presence of molten Na2SO4 + V2O5 salts.

De la Roche, J., Juan Manuel Alvarado-Orozco, Alejandro Toro. Rare Metals (2020); 

Experimental-numerical failure analysis of the c-Al0. 66Ti0. 34N-M2 steel system applying instrumented indentation and extended finite element method

Gómez-Ovalle, A. E., Torres, M., Jimenez, S. M. A., Alvarado-Orozco, J. M., Espinosa-Arbeláez, D. G., Gonzalez-Carmona, J. M., Mondragón-Rodríguez, G. C. Surface and Coatings Technology (2020) 393, 125845;

Reconstrucción virtual tridimensional de entornos urbanos complejos

García-Moreno, A., & González-Barbosa, J. Revista Iberoamericana de Automática e Informática industrial (2020) 17(1), 22-33;

Theoretical and experimental study of FeSi on magnetic and phase properties

Piamba, J.F., Ortega, C., Hernández-Bravo, R. et al. Applied Physics A (2020) 126(849);

Wear mechanisms identification using Kelvin probe force microscopy in TiN, ZrN and TiN/ZrN hard ceramic multilayers coatings

JM González-Carmona, JD Triviño, Á Gómez-Ovalle, C Ortega, JM Alvarado-Orozco, H Sánchez-Sthepa, A Avila. Ceramics International (2020) 46(15), 24592-24604;

Image-based porosity classification in Al-alloys by laser metal deposition using random forests

Angel-Iván García-Moreno, Juan-Manuel Alvarado-Orozco, Juansethi Ibarra-Medina, Enrique Martínez-Franco. The International Journal of Advanced Manufacturing Technology (2020) 110, 2827-2845;

Thermal properties and degradation kinetics of epoxy-γ-alumina and epoxy-zinc oxide light weight composites

Camacho, N., J. F. May-Crespo, J. B. Rojas-Trigos, K. Martinez, Ernesto Marin, and G. C. Mondragon-Rodriguez. Revista Mexicana de Física (2020) 66(4), 479-489;

Characterization of a C-based coating applied on an AA6063 alloy and developed by a novel electrochemical synthesis route.

Gallegos-Melgar, A. Yael González-López, Arturo Abúndez, Francisco Javier Flores-Ruiz, Juan C Díaz-Guillén, José Betancourt-Cantera, Maricruz Hernández-Hernández, Gerardo Trápaga-Martínez, Carlos Poblano-Salas, Jorge Acevedo-Dávila, Jan Mayen. Coatings (2020) 10(2), 145;

Evaluation of Corrosion Inhibition of 1018 Carbon Steel using an Avocado Oil-Based Green Corrosion Inhibitor

O Sotelo-Mazon, S Valdez, J Porcayo-Calderon, J Henao, C Cuevas-Arteaga, CA Poblano-Salas, L Martinez-Gomez. Protection of Metals and Physical Chemistry of Surfaces (2020) 56(2), 427-437;

Perovskite Materials in Batteries

Henao, J, Yilber Pacheco, and Lorenzo Martinez-Gomez. Revolution of Perovskite (2020) 153-173;

Characterization of Yb2Si2O7–Yb2SiO5 composite environmental barrier coatings resultant from in situ plasma spray processing

E Garcia, O Sotelo-Mazon, CA Poblano-Salas, G Trapaga, S Sampath. Ceramics International (2020) 46(13), 21328-21335;

2019

Optimization of Inconel 718 thick deposits by cold spray processing and annealing

LI Pérez-Andrade, F Gärtner, M Villa-Vidaller, T Klassen, J Muñoz-Saldaña, JM Alvarado-Orozco. Surface and Coatings Technology (2019) 378, 124997;

High temperature interaction of volcanic ashes with 7YSZ TBC's produced by APS: Infiltration behavior and phase stability 

Marco A Rivera-Gil, Juan J Gomez-Chavez, CV Ramana, Ravisankar Naraparaju, Uwe Schulz, Juan Muñoz-Saldaña. Surface and Coatings Technology (2019) 378, 124915;

Effect of HVOF Process Parameters on TiO2 Coatings: An Approach Using DoE and First-Order Process Maps

GA Clavijo-Mejía, DG Espinosa-Arbeláez, JA Hermann-Muñoz, AL Giraldo-Betancur, J Muñoz-Saldaña. Journal of Thermal Spray Technology (2019) 28(6), 1160-1172;

Controlling micro-porous size in TiO2 pellets processed by sol-gel and rapid liquid phase sintering

Duilio Valdespino, Gabriel Rojas-George, Juan Muñoz-Saldaña, Bárbara Moreno-Murguía, Ma Cruz-Jáuregui. Ceramics International (2019) 45(12), 14510-14516;

Preferred Growth Orientation of Apatite Crystals on Biological Hydroxyapatite Enriched with Bioactive Glass: A Biomimetic Behaviour

July Andrea Rincón-López, Jennifer Andrea Hermann-Muñoz, Nuria Cinca-Luis, Beatriz Garrido-Domínguez, Irene García-Cano, Jose Maria Guilemany-Casadamon, Juan Manuel Alvarado-Orozco, Juan Muñoz-Saldaña. Crystal Growth & Design (2019) 19(9), 5005-5018;

Effect of pre-oxidation treatments on the structural, microstructural, and chemical properties of β-(Ni, Pt) Al system

García-Herrera JE, Espinosa-Arbeláez DG, Cáceres-Díaz LA, Mondragón-Rodríguez GC, Ruiz-Luna H, González-Hernández J, Trápaga-Martínez LG, Muñoz-Saldaña J, Alvarado-Orozco JM. Surface and Coatings Technology. (2019) 367, 156-164;

Bioactivity Analysis of Radio-opaque BG45S5/Bi2O3 Coatings deposited by Thermal Spray

Clavijo-Mejia GA, El Hafiane Youssef, Muñoz-Saldaña J, Ageorges Hélene. International Thermal Spray Conference and Exposition ITSC (2019);

Microstructural evaluation and nanohardness of an AlCoCuCrFeNiTi high-entropy alloy

Gómez-Esparza CD, Pérez-Bustamante R, Alvarazo-Orozco JM, Muñoz-Saldaña J, Martínez-Sánchez R, Olivares-Ramírez JM, Duarte-Moller A. International Journal of Minerals, Metallurgy, and Materials (2019) 26(5), 634-641;

A novel bismuth-based lead-free piezoelectric transducer immunosensor for carbaryl quantification

Fernández-Benavides DA, Cervera-Chiner L, Jiménez Y, de Fuentes OA, Montoya A, Muñoz-Saldaña J. Sensors and Actuators B: Chemical (2019) 285, 423-430; 

Isothermal phase transformations of bovine-derived hydroxyapatite/bioactive glass: A study by design of experiments

Rincon-Lopez, J.A., Hermann-Muñoz J.A., Fernandez-Benavides, D. A., Giraldo-Betancur A.L., Alvarado Orozco J.M., and Muñoz-Saldaña, J. Journal of the European Ceramic Society (2019) 39(4), 1613-1624361;

Influence of HVOF parameters on HAp coating generation: An integrated approach using process maps

Hermann-Muñoz JA, Rincón-López JA, Clavijo-Mejía GA, Giraldo-Betancur AL,  Alvarado-Orozco JM, De Vizcaya-Ruiz A, Muñoz-Saldaña J. Surface and Coatings Technology (2019) 358, 299-307;

Control parameters correlation by multiple linear robust regression for the design of heat treatments for Al-6063 alloy.

Mayén, J., Gallegos-Melgar, A., Mercado-Lemus, V. H., Hernandez-Hernandez, M., Abúndez, A., Alcudia, E., Poblano-Salas, C. A. Experimental Techniques (2019) 43(1), 91-103.

2018

Comparative Study of Ferroelectric and Piezoelectric Properties of BNT-BKT-BT Ceramics near the Phase Transition Zone

Fernandez-Benavides, D. A., Gutierrez-Perez, A. I., Benitez-Castro, A. M., Ayala-Ayala, M. T., Moreno-Murguia, Barbara, Muñoz-Saldaña, J. Materials (2018) 11(3), 361;

Synthesis, Characterization and In Vitro Study of Synthetic and Bovine-Derived Hydroxyapatite Ceramics: A Comparison

Rincón-López, J.A, Hermann-Muñoz, J.A., Giraldo-Betancur, A.L., De Vizcaya-Ruiz, A., Alvarado-Orozco, J.M., Muñoz-Saldaña, J. Materials (2018) 11(3), 333;

Microstructure and lifetime of Hf or Zr doped sputtered NiAlCr bond coat/7YSZ EB-PVD TBC systems

Muñoz Saldaña,  J., Schulza, U., Mondragón-Rodríguezac, G.C., Caceres-Diaz, L.A., H. Lau. Surface and Coatings Technology (2018) 335, 41-51;

Reinterpretation of Type II Hot Corrosion of Co-Base Alloys Incorporating Synergistic Fluxing. 

Alvarado-Orozco, J. M., Garcia-Herrera, J. E., Gleeson, B., Pettit, F. S.,  Meier, G. H. Oxidation of Metals. (2018) 90(5-6). 527-553;

Microstructural analysis of Ta-containing NiCoCrAlY bond coats deposited by HVOF on different Ni-based superalloys.

Mora-García, A. G., Ruiz-Luna, H., Mosbacher, M., Popp, R., Schulz, U., Glatzel, U., Muñoz-Saldaña, J. Surface and Coatings Technology. (2018) 354, 214-225;

Additive Manufacturing of Nickel-Based Superalloys.

Graybill, B., Li, M., Malawey, D., Ma, C., Alvarado-Orozco, J. M., Martinez-Franco, E. ASME 13th International Manufacturing Science and Engineering Conference (2018);

Nickel/Alumina Metal Matrix Nanocomposites Obtained by High-Energy Ball Milling and Spark Plasma Sintering.

Martínez-Franco, E., Li, M., Cuenca-Álvarez, R., González-Hernández, J., Ma, C., Alvarado-Orozco, J. M. ASME 13th International Manufacturing Science and Engineering Conference (2018);

Preparation of air stable nanoscale zero valent iron functionalized by ethylene glycol without inert condition.

Ruiz-Torres, C. A., Araujo-Martínez, R. F., Martínez-Castañón, G. A., Morales-Sánchez, J. E., Guajardo-Pacheco, J. M., González-Hernández, J., Ruiz, F. Chemical Engineering Journal (2018)  336, 112-122;

Closed-form solutions for the optimal design of inerter-based dynamic vibration absorbers.

Barredo, E., Blanco, A., Colín, J., Penagos, V. M., Abúndez, A., Vela, L. G., Mayén, J.  International Journal of Mechanical Sciences (2018)  144, 41-53;

Statistical Analysis of Sputter Parameters on the Properties of ZnO Thin Films Deposited by RF Sputtering.

Flores-García, E., González-García, P., González-Hernández, J., Ramírez-Bon, R.  Journal of Electronic Materials (2018) 47(9), 5537-5547;

Coatings characterization of Ni-based alloy applied by HVOF.

Cabral Miramontes, J., Pedraza Basulto, G. K., Gaona Tiburcio, C., Zambrano Robledo, P. D. C., Poblano Salas, C. A., Almeraya Calderón, F.  Aircraft Engineering and Aerospace Technology (2018)  90(2), 336-343;

Characterization, Deposition Mechanisms, and Modeling of Metallic Glass Powders for Cold Spray.

Henao, J., Sharma, M. M. Cold-Spray Coatings (2018) 251-272;

Deposition behavior of cold-sprayed metallic glass particles onto different substrates.

Henao, J., Bolelli, G., Concustell, A., Lusvarghi, L., Dosta, S., Cano, I. G., Guilemany, J. M. Surface and Coatings Technology (2018) 349, 13-23;

Development and evaluation of a green corrosion inhibitor based on rice bran oil obtained from agro-industrial waste.

Salinas-Solano, G., Porcayo-Calderon, J., de la Escalera, L. M., Canto, J., Casales-Diaz, M., Sotelo-Mazon, O., Henao, J., Martinez-Gomez, L. Industrial Crops and Products (2018)  119, 111-124;

Effect of the noble metals addition on the oxidation behavior of Ni3Al.

Ramos-Hernandez, J. J., Porcayo-Calderon, J. E. S. U. S., Gonzalez-Rodriguez, J. G., Mayén, J., Lara-Rodriguez, G., Salinas-Bravo, V. M., Martinez-Gomez, L.  Advances in Materials Science and Engineering (2018)  18, 1-19;

Hydrogen storage in a rare-earth perovskite-type oxide La0.6Sr0.4Co0.2Fe0.8O3 for battery applications.

Henao, J., Sotelo, O., Casales-Diaz, M., Martinez-Gomez, L. Rare Metals (2018) 37, 1003-1013;

Lanthanum titanate nanometric powder potentially for rechargeable Ni-batteries: Synthesis and electrochemical hydrogen storage.

Henao, J., Pacheco, Y., Sotelo, O., Casales, M., Martinez-Gómez, L. Journal of Materials Research and Technology (2018) 8(1), 759-765;

Mass Transfer Study of a Batch Aluminum Degassing Ladle with Multiple Designs of Rotating Impellers

Abreu-López, D., Dutta, A., Camacho-Martínez, J. L., Trápaga-Martínez, G., Ramírez-Argáez, M. A.  JOM (2018)  12, 2958-2967;

Microalloyed steels through history until 2018: review of chemical composition, processing and hydrogen service.

Villalobos, J., Del-Pozo, A., Campillo, B., Mayen, J., Serna, S.  Metals, (2018) 8(5), 351;

Surface Engineering at High Temperature: Thermal Cycling and Corrosion Resistance. In Production, Properties, and Applications of High Temperature Coatings

Henao, J., Sotelo, O.   IGI Global, (2018)  ISBN10:1522541942. 557.

High temperature infiltration behavior of three volcanic ashes of YSZ APS-deposited thermal barrier coatings.

Marco Antonio Rivera Gil, Juan Muñoz Saldaña, Juan José Gómez Chávez, Chintalapalle Ramana, Ravisankar Naraparaju, Uwe Schulz. ECI Symposium Series, (2018) USA Eds

HVOF hydroxyapatite/titania graded coatings: microstructural, mechanical and in-vitro characterization

Henao, J., Cruz-bautista, M., Hincapie-Bedoya, J., Ortega-Bautista, B., Corona-Castuera, J., Giraldo-Betancur, A.L., Espinosa-Arbelaez, D.G., Alvarado-Orozco, J.M., Clavijo-Mejía, G.A., Trapaga-Martínez, L.G., Poblano-Salas, C. A.  Journal of Thermal Spray Technology, (2018)  27. 1302-1321

Effect of pre-oxidation treatments on the structural, microstructural, and chemical properties of (Ni,Pt)Al systems.

Garcia-Herrera, J. E., Espinosa-Arbeláez, D.G., Cáceres-Díaz, L.A., Mondragón-Rodríguez, G.C., Ruiz-Luna,H., González-Hernández, J., Trápaga-Martínez, L.G., Muñoz Saldaña, J., and Alvarado-Orozco, J.M.  Surface and coatings Technology. (2018) SURFCOAT-S-18-04874

2017

Influence of oxidation treatments and surface finish on the electromechanical behavior of HVOF Ni-20Cr coatings.

H. Ruiz-Luna, J. Porcayo-Calderon, J.M. Alvarado-Orozco, A.G. Mora-García, L. Martinez-Gomez, L.G. Trápaga-Martínez, J. Muñoz-Saldaña. Journal of Materials Engineering and Performance (2017); doi: 10.1007/s11665-017-3048-1.

Thermal Spray Deposition, Phase Stability and Mechanical Properties of La2Zr2O7/LaAlO3 Coatings

D. Lozano-Mandujano, C. A. Poblano-Salas, H. Ruiz-Luna, B. Esparza-Esparza, A. L. Giraldo-Betancur, J. M. Alvarado-Orozco, L.G. Trapaga-Martinez, J. Muñoz-Saldaña.  Journal of Thermal Spray Technology (2017); doi:10.1007/s11666-017-0569-y.

Surface oxidation of Ni20Cr/Cr3O2 composite processed by ball milling and HVOF thermal spraying

Israel López-Báez, Enrique Martínez-Franco, Carlos Agustín Poblano-Salas, Luís Gerardo Trápaga-Martínez. Vacuum (2017) 144, pp. 27-35.

A comparative study of the mechanical properties of Tungsten/Titanium Nitride/304 Stainless Steel and Zirconium Nitride/304 Stainless Steel deposited by Unbalanced Magnetron Sputtering

Amilkar Fragiel, Juan Muñoz-Saldaña, Sergio Serna, Julio C. Villalobos, Edgar López-Martínez, and Bernardo Campillo. Metals (2017) 7, x; doi: for peer review.

Characterization of mechanical properties and electrochemical behaviour in a Hank´s solution of 316L/Cr1-xAlxN system

D.M. Osorio, J.C. Caicedo, W. Aperador, A.M. Benitez-Castro, A.L. Giraldo-Betancur, J. Muñoz-Saldaña, J.M. Yañez-Limón, O. Sanchez, and G. Zambrano.  IOP Conf. Series: Journal of Physics: Conf. Series 786 (2017) 012037; doi:10.1088/1742-6596/786/1/012037.

Solid state synthesis of Bi0.4Sr0.6FeO3−δ powder for SOFC applications

M. Rico, R. Rodriguez, V. H. Zapata, M. H. Medina-Barreto, B. Cruz-Muñoz,  J. A. Tabares, A. M. Benitez-Castro, A. L. Giraldo-Betancur,  J. Muñoz-Saldaña. Hyperfine Interactions (2017) 238:57; doi: 10.1007/s10751-017-1427-5.

Properties of sputtered ZnS and ZnS:A (A = Er, Yb) films grown at low substrate temperatures

C.A. Ortiz, A.L. Giraldo-Betancur, M.A. Hernández-Landaverde, M. Ramírez-Cardona, A. Mendoza-Galván, S. Jiménez-Sandoval. Journal of Vacuum Science & Technology A: Vacuum, Surfaces, and Films 35, 031505 (2017); doi:10.1116/1.4978946.

Influence of Alloy Composition and Exposure Conditions on the Selective Oxidation Behavior of Ni–Al Alloys

L. García-Fresnillo, J. M. Alvarado-Orozco G. H. Meier. Oxidation of Metals (2017), Volume 88, Issue 3–4, pp 327–338; doi:10.1007/s11085-017-9740-6.

Na2SO4-Deposit- Induced Corrosion of Mo-Containing Alloys

B.S. Lutz, J.M. Alvarado-Orozco, L. Garcia-Fresnillo, G.H. Meier. Oxidation of Metals (2017); doi:10.1007/s11085-017-9746-0.

Study of the morphological, structural, thermal, and pasting corn transformation during the traditional nixtamalization process: From corn to tortilla

J.A. Villada, F. Sánchez-Sinencio, O. Zelaya-Angel, E. Gutierrez-Cortez, M.E. Rodríguez-García. Journal of Food Engineering 212 (2017) 242-251; doi: 10.1016/j.jfoodeng.2017.05.034.

Effect of Multiwall Carbon Nanotubes (MWCNs) Reinforcement on the Mechanical Behavior of Synthesis 7075 Aluminum Alloy Composites by Mechanical Milling

Carreño-Gallardo, C., Uriza-Vega, E., Estrada-Guel, I., Herrera-Ramírez, M., Martínez-Sánchez, R., López-Meléndez, C., & Martínez-Franco, E. Microscopy and Microanalysis (2017), 23(S1), 1930-1931.

Synthesis and Characterization of Carbon Nanotubes Via Spray Pyrolysis Method

Uriza-Vega, E., Herrera-Ramírez, M., López-Meléndez, C., Estrada-Guel, I., Martínez-Franco, E., Martínez-Sánchez, R., & Carreño-Gallardo, C. Microscopy and Microanalysis (2017), 23(S1), 1928-1929.

Evaluation of hardness and precipitation in Zn-modified Al 2024 alloy after plastic deformation and heat treatments

Garay-Reyes, C. G., González-Rodelas, L., Cuadros-Lugo, E., Martínez-Franco, E., Aguilar-Santillan, J., Estrada-Guel, I., Martínez-Sánchez, R. Journal of Alloys and Compounds (2017), 705, 1-8.

2016

Synthesis of lanthanum aluminate by reverse chemical precipitation using pseudoboehmite as alumina precursor

Hernández-Muñoz, W., Serrato-Rodríguez, J., Muñoz-Saldaña, J., Zárate-Medina, J. Applied Radiation and Isotopes (2016), 117, 96-99.

Electrochemical Corrosion of HVOF-Sprayed NiCoCrAlY Coatings in CO2-Saturated Brine

Ruiz-Luna, H.,Porcayo-Calderon, J.,  Alvarado-Orozco, J. M., García-Herrera, J. E., Martinez-Gomez, L., Trápaga-Martínez, L.G., Muñoz-Saldaña, J. Journal of Thermal Spray Technology (2016);25, Issue 7, 1330–1343.

Study of the Isothermal Oxidation Process and Phase Transformations in B2-(Ni, Pt) Al/RENE-N5 System

Cáceres-Díaz, L. A., Alvarado-Orozco, J.M., Ruiz-Luna, H., García-Herrera, J.E., Mora-García, A.G., Trápaga-Martínez, G., Arroyave, R.,  Muñoz-Saldaña, J. Metals (2016), 6(9), 208.

Bi4Si3O12 thin films for scintillator applications

Rincón-López, J.A., Fernández-Benavides, D.A., Giraldo-Betancur, A.L., Cruz-Muñoz, B., Riascos, H., Muñoz-Saldaña, J. Applied Physics A (2016), 122:429.

In vitro and in vivo biocompatibility evaluation of hydroxyapatite coatings deposited by high velocity oxygen fuel on micromplants for bone prosthetic applications

Uribe-Ramírez, M., Escamilla-Rivera, V.,  Esquivel-Gaón, M.,Solorio-Rodríguez, A., Hermann-Muñoz, J.A., Clavijo-Mejía, G.A., Chavez-Alvarez, B., Sam-Miranda, C.,  Fernández-Hernández, J.,Muñoz-Saldaña, J., De Vizcaya-Ruiz, A. Toxicology Letters (2016); DOI: 10.1016/j.toxlet.2016.07.363.

Biomimetic titania/hydroxyapatite coating of CrCoMo microimplants enhances biocompatibility and reduces metal-associated toxicity

Escamilla-Rivera, V., Uribe-Ramírez, M., Esquivel-Gaón, M.,  Rodriguez, L., Giraldo-Betancur, A.L., Campos-Villegas, L., Arreola-Mendoza, L., Muñoz-Saldaña, J., De Vizcaya-Ruiz, A. Toxicology Letters (2016); DOI:  10.1016/j.toxlet.2016.07.364.

2015

Kinetic Study of the Competitive Growth Between θ-Al₂O₃ and α-Al₂O₃ During the Early Stages of Oxidation of β-(Ni,Pt)Al Bond Coat Systems: Effects of Low Oxygen Partial Pressure and Temperature

J.M. Alvarado-Orozco,R. Morales-Estrella, M.S. Boldrick, L.G. Trápaga-Martínez, B. Gleeson, J. Munoz-Saldana. Metallurgical and Materials Transactions A 12/2014; 46(2).

Effects of VC additions on the mechanical properties of bimodal WC–Co HVOF thermal sprayed coatings measured by nanoindentation

C.A. Poblano-Salas, J.A. Cabral-Miramontes, A. Gallegos-Melgar, H. Ruiz-Luna, J.D. Aguilar-Escobar, D.G. Espinosa-Arbelaez, F. Espinoza-Beltrán, G. Trapaga-Martínez, J. Muñoz-Saldaña. International Journal of Refractory Metals and Hard Materials (2015) 48: 167–178.

Bismuth-based nanoparticles as the environmentally friendly replacement for leadbased piezoelectrics

M. Esquivel-Gaon, S. Anguissola, D. Garry, A. del C. Gallegos-Melgar, J. Muñoz-Saldaña, K. A. Dawson, A. De Vizcaya-Ruiz, and L. M. Del Razo. The Royal Society of Chemistry Advances, (2015), 5, 27295–27304 | 27295

Corrosion mechanism of NiCrWMo coating deposited by HVOF

J.Y. Achem Calahorra, C.G. Tiburcio, F. Estupinan, A.T. Estrada, C.A. Poblano-Salas, F.A. Calderon, J.A. Cabral-Miramontes. ECS Transactions 04/2015; 64(26):89-94. 

Evaluation of the Electrochemical Behavior in Acid Media of HVOF-Spray Alloy Coatings

J.A. Cabral-Miramontes, J.Y. Achem-Calahorra, A. Trujillo-Estrada, G. Pedraza-Basulto, C.A. Poblano-Salas, F. Almeraya-Calderon. ECS Transactions 04/2015; 64(26):81-87.

Effects of the Modification of Processing Parameters on Mechanical Properties of HVOF Cr2C3-25NiCr Coatings

I. López-Báez, C.A. Poblano Salas, J. Muñoz-Saldaña, L.G. Trápaga-Martínez. Journal of Thermal Spray Technology, August 2015, Volume 24, Issue 6, pp 938-946.

Ferroelectric properties of manganese doped (Bi1/2Na1/2)TiO3 and (Bi1/2Na1/2)TiO3–BaTiO3 epitaxial thin films

A. Gallegos-Melgar, D.G. Espinosa-Arbelaez, F.J. Flores-Ruiz, A. Lahmar, J.-L. Dellis, N. Leméeb, F.J. Espinoza-Beltran, J. Muñoz-Saldaña. Applied Surface Science 359 (2015) 923–930. 

High-toughness/low-friction ductile epoxy coatings reinforced with carbon nanostructures

A.O. Okonkwo, P. Jagadale, J.E. García-Herrera, V.G. Hadjiev, J. Muñoz-Saldaña, A. Tagliaferro, F.C. Robles-Hernandez. Polymer Testing 47 (2015) 113-119.

The Effect of Different SO2/SO3 Catalytic Media on High-Temperature Corrosion Processes (Hot Corrosion, Fireside Corrosion, Sulfidation–Oxidation)

J.E. García-Herrera, J.M. Alvarado-Orozco, J. Munoz-Saldana, L. Garcia-Fresnillo, G.H. Meier. Oxidation of Metals, October 2015, Volume 84, Issue 3, pp 233-240.

Influence of substrate temperature and N2/Ar flow ratio on the stoichiometry, structure and hardness of TaNx coatings deposited by DC reactive sputtering

K. Valdez, D.G. Espinosa-Arbeláez, J.E. García-Herrera, J. Muñoz-Saldaña, M.H. Fariasc and W. De la Cruz. Surface and Interface Analysis November 2015; Vol. 47, Issue 11, pp 1015–1019.

Bi4Si3O12 Thin films for Scintillator Applications

J.A. Rincón-López, D.A. Fernández-Benavides, A.L. Giraldo-Bentacur, B. Cruz-Muñoz, H. Riascos-Landazury, J. Muñoz-Saldaña. Aceptado para su publicación en Applied Physics A. (Edición + Volumen) 2016.